|
ตามคู่มือของphilipsนะครับ (เห็นโลโก้Philipsลางๆ ในรูปที่คุณเล็กแห้งตับสดแปะมาให้ดู)
Calc-Clean function
Use the Calc-Clean function once every two weeks. If the water in your area is very hard (i.e. when flakes come out of the soleplate during ironing), use the Calc-Clean function more frequently. 1 Set the steam control to position 0 and remove the mains plug from the wall socket.
2 Fill the water tank to the maximum level. Do not pour vinegar or other descaling agents in the water tank.
3 Set the temperature dial to MAX.
4 Put the mains plug in an earthed wall socket.
5 Unplug the iron when the temperature light goes out.
6 Hold the iron over the sink. Push the steam control to the CALC CLEAN position and hold it. Gently shake the iron to and fro (Fig. 16). ,, Steam and boiling water come out of the soleplate. Impurities and flakes (if any) are flushed out.
7 Release the steam control as soon as all the water in the tank has been used up.
8 Repeat the Calc-Clean process if the iron still contains a lot of impurities.
After the Calc-Clean process
1 Put the plug back into the wall socket and let the iron heat up to let the soleplate dry.
2 Unplug the iron when the temperature light goes out.
3 Move the iron gently over a piece of used cloth to remove any water stains that may have formed on the soleplate.
4 Let the iron cool down before you store it.
จากคุณ |
:
พฤหัสที่12
|
เขียนเมื่อ |
:
20 ธ.ค. 53 11:19:55
|
|
|
|
|